ALTERNATOR P/N 50TA101-377, PN MIL-A-24215/10, PN M24215/10-001, PN MIL-DTL-24215/10, NSN 5985 01 119 1180, 50TA101-377, MIL-A-24215/10, M24215/10-001, MIL-DTL-24215/10, 5985 01 119 1180
Click To Enlarge
ALTERNATOR
P/N 50TA101-377
PN MIL-A-24215/10
PN M24215/10-001
PN MIL-DTL-24215/10
NSN 5985 01 119 1180
MFG MILITARY SPECIFICATIONS

NEW GOV SURPLUS
SUPPLIER CAGE CODE 0E3F7

ITEM NAME: ATTENUATOR,VARIABLE
DEFINITION: A device for reducing the strength of an alternating current signal
either continuously or in steps, without causing appreciable signal
distortion, by maintaining substantially constant output and/or input
impedance match. Continuously variable resistive devices must consist
of at least two sections or one section with at least two rotating
contacts. The item must have an overall attenuation rating. Includes
tandem mounted variable resistors designed to function as an
attenuator but whose terminals are not connected. See also RESISTOR,
VAIABLE (as modified).


CHARACTERISTIC VALUE
III APPLICATION DESIGN TRANSMISSION LINE
BODY STYLE COAXIAL TYPE
OVERALL LENGTH 9.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE 8.250 INCHES NOMINAL
BETWEEN MOUNTING FACILITIES
PARALLEL TO LENGTH
CENTER TO CENTER DISTANCE 1.750 INCHES NOMINAL
BETWEEN MOUNTING FACILITIES
PARALLEL TO WIDTH
OVERALL HEIGHT 2.030 INCHES NOMINAL
OVERALL WIDTH 2.250 INCHES NOMINAL
III SCALE LINEARITY LINEAR
III SCALE DIVISION QUANTITY 100
III OPERATING TEMP RANGE 0.0 TO 65.0 DEG CELSIUS
VOLTAGE STANDING WAVE RATIO 1.40
COAXIAL CONNECTOR SERIES BNC
DESIGNATION
POWER RATING 1.0 WATTS PEAK
MOUNTING FACILITY SCREW UNC
THREAD SERIES DESIGNATOR
INSERTION LOSS AT MINIMUM 0.6
ATTENUATION IN MAXIMUM
DECIBELS
OVERALL ATTENUATION RANGE 0.0 TO 101.0
IN DECIBELS
ATTENUATION VARIATION STEPPED
METHOD
STEP POSITION QUANTITY 101
ATTENUATION PER STEP IN 1.0
DECIBELS
MOUNTING FACILITY TYPE AND 4 THREADED HOLE
QUANTITY
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM
OVERALL ATTENUATION -2.00 TO 2.00
ACCURACY IN DECIBELS
MOUNTING THREAD QUANTITY 32 PER INCH
ADJUSTMENT DEVICE TYPE AND 9 LEVER
QUANTITY
MOUNTING FACILITY PATTERN FOUR POSITION RECTANGULAR
MOUNTING FACILITY NOMINAL 0.164 INCHES
SCREW THREAD DIAMETER
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
DEFINITIVE GOVERNMENT M24215/10-001
SPEC/STD REFERENCE
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT MIL-DTL-24215/10
SPEC/STD REFERENCE
SPEC/STD CONTROLLING DATA 81349
MANUFACTURERS CODE
TEST DATA DOCUMENT 81349-MIL-A-24215 SPECIFICATION (INCLUDES
ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT
REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION
FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY
DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS,
REFLECTING GENERAL TYPE DATA ON CERTAIN
ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND
TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL",
"AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, FEMALE
  • Item #: 5985 01 119 1180
  • Manufacturer: MILITARY SPECIFICATIONS
  • Manufacturer's Product Number: 5985 01 119 1180
  • Condition: New

ALTERNATOR P/N 50TA101-377

Price: $288.00
* Marked fields are required.
Availability: In-Stock
# Available: 1
Qty: *